G070VVN01.2

 1.Operating Precautions
1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not
to scratch it.
2) Be sure to power off your machine before connecting or disconnecting your signal cable to
TFT-LCD Module.
3) Wipe off water drop on display area immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard
object.
6) To avoid ESD (Electro Static Discharge) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the TFT-LCD module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged.
10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply
abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module by
end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen
saver or moving content periodically if fixed pattern is displayed on the screen.

2. General Description
This specification applies to the 7.0 inch color TFT LCD with AMVA (Advanced MVA)
technology module G070VVN01.2. It composed of a TFT-LCD panel, driver ICs, PCB with power
supply circuit and backlight unit.
The screen format is intended to support the WVGA (800(H) x 480(V)) screen and 16.2M
(8-bits) or 262k colors (6-bits) by digital RGB interface.
2.1 Features
 7.0 inch (15:9) display
 WVGA (800 × 480) resolution
 Digital parallel RGB 6/8bit interface
 Scan direction reversible
 High brightness
 High Contrast ratio
 Wide viewing angle with Advanced MVA technology
 RoHs compliance
2.2 Display Characteristics
The following items are G070VVN01.2 characteristics summary at 25 ????(Room Temperature).